I was using the savox HV servos 1267sg throttle and 1268sg steering for truggy. Went two racing season and did not have a problem, worked great. I started racing buggy and wanted to run the same servos on everything but my shop could not get the savox, they sell me everything at cost +10%. So I switched to Hitec; I bought the 7954. They are the least expensive out of the HV line up because they are the only one with steel gears. I bought 4 of them, a set for the truggy and buggy, and they work great. I thought I might not like the travel speed .12sec @ 7.4v but it is plenty fast enough and the torque is 403oz @ 7.4v. Everything you need for just under $100.