so can somebody argue why im not as fast with my long chassis compared to stock? here is my setup-
front of car- 30 weight losi oil 3 limiters dark yellow k springs,#1 piston
shock is inside tower out of arm
camber link is in on the tower with one washer,middle hole on caster block
2 bump steer spaces.spindles are shimmed middle and caster block is shimmed forward.
Back of the car-30 weight losi oil #2 piston 2 limiters dark yellow k springs
shock is inside of tower and arm, i grinded the u brace flat no washers under stud which is inside hole, middle hole on plastic hubs zero degree shimmed middle.
carbon rear arms, plastic hinge pin brace 8.5 sp moter lrp sxx stock spec