Originally Posted by
vasidudu
Hey cavg,
Thx for the fast reply.
What do these adapters look like?
Something like this:
http://www.amainhobbies.com/product_...nion-Adaptor-2
Never seen these before; is it ok to use these?
I saw the OFNA pinions but only up to 16T in mod 1 (3mm shaft).
Thx for the help,
V
Edit: out of the box with a MMPro /1415/2400Kv, what would be an ideal start pinion wise? 16T, 15T, 14T???
Driving on 1/8 rough track, 1 long straight, couple of U turns, doubles, tables etc...
Yes that's it. I have been using one for my 14t pinion with the 1410. Only issue I had was when I wanted to borrow a 15t, and I couldn't fit it properly. But I was on track and stressed so I didn't try too hard.
The 1415 needs to be geared pretty high from what I understand (because of the low Kv). Check the front page for tips!