Originally Posted by
g12314
You are overgeared for the track size and have too much timing being applied too quickly. These will cause the excessive motor temperature reading you are getting.
I would suggest the following:
FDR range: 7.5 for starting point.
ESC Settings:
9 . 35
10 . 6
12 . 18
13 . 5000
14 . 0.1 sec
15 . 600
Jimmy
hai jimmy....test drive the car today with the fdr that u suggest and esc setting.....finally i come up with this...
track temp 47'c
fdr 7.0
esc setting
4 . 8
9 . 36
10 . 12
12 . 20
13 . 6000
14 . 0.1 sec
15 . 700
after two minute run temp is 78'c.....car was good on both acc and top end...got the fast lap today then the last time.
is this range of temp would be ok? if it is ok....so i stick with this set up...and i would like to thank you again jimmy.....long live speed passion.....