About the subject of 1S speedo, one question
I only have 2s esc at hand.
I try to wire only one of the two saddles and the ESC worked, so was the receiver and servo. Of course the ESC has to be set without a cell limit set
as 3.0V per cell so 6.0v by design as a 2S ESC.
Using a receiver lipo (or a booster), I thought I could run 5-8 mn without hitting the cell ceiling (4.2v to 3.5v I guessed, about the same amount of mA
vs time as my 2wd offroad with 2S and 7.5)
The cell is 6000mA/60C, motor 10.5 non boosted
Sounds about right or big no-no ?