Originally Posted by
Jamesalex
I am wondering if you guys can help.
Just working out on everything possibly needed to make the switch to the TC6, am I am lead to believe there is a mod on the diffs that you do in turms of the screw, using one from one of there offroad cars. Can anyone tell me if this is correct and if possible what parts number(s) are needed for this.
Regards
James
http://www.amainhobbies.com/product_...-Locking-T-Nut
or
http://www.amainhobbies.com/product_...tial-Screw-Kit
It is the locking T-nut that you need. And I strongly recommend it. Especially with the Slipper Spool. As I was building my Spool with the kit nut/retainer, as I was tightening it the nut stripped out the inside of the retainer and spun itself off the screw... and it fired the damn thrust spring out of the outdrive like a cannon. It took me an hour to find it, but Im glad it didn't put anyone's eye out.
Pick up a couple of the T-nuts as backups and use them for all the Spools/ball diffs you build.