R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 09-18-2011 | 11:20 PM
  #5986  
Ryno B4.1
Registered User
iTrader: (4)
 
Joined: Feb 2011
Posts: 411
From: Mesa, AZ
Default

Originally Posted by ovalracer1m
Just now seen that he had only a few posts. Maybe should have worded it a bit differently. Just gets old when people can't follow simple forum guidelines and clutter up a thread that is here to discuss a certain rc car.

On another note, got a chance to run both the rcrd aluminum chassis on the b4 and t4. Was really pleased with the chassis and the way they handled on the track. Was running a cut +8 chassis and tried the +12 rcrd chassis since the track I race on is pretty blown out and pretty wide open and flowing. B4 was more predictable all around and could be driven much harder without getting out of shape. If you want another option
besides modding a t4 chassis I would definitely give these a try. As for setup, I was running a very similar setup wild cherry posted besides the springs. Ended up with orange front k springs and dark yellow rear springs.
Does the +12 chassis keep the car within the ROAR specs? I know 4mm is not much but was just wondering how close it is since the team guys are running only 8mm longer
Ryno B4.1 is offline