R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 09-18-2011 | 07:51 PM
  #5975  
idrummerboy13's Avatar
idrummerboy13
Tech Elite
iTrader: (15)
 
Joined: Jul 2010
Posts: 2,021
From: Deer Park
Default

Originally Posted by RickSlick
I have a new RTR B4.1 and the only thing I've done to it is put double D tires on the back. I'm somewhat of a rookie to all this, so I ask you all this.
What would be the first thing I could do to this car that will improve performance? I am more interested in handling improvements rather than speed. I run entirely on outdoor clay tracks which vary from somewhat hard with no dust to fairly dusty once everyone has run on it awhile.
Thanks, Rick
i was in he same position as you 7 months back, you want to run the tires everybody is running there, get the toe in block kit that comes with all the toe in selections, run the 3.5 degree block to start and get the anti squat kit, 2 degrees or the thicker shim goes under the block. #2 pistions with 3 limiters in front and 2 in rear green in rear and add weight, one square in each rear triangle and 2 in back of the toe in blocks....good luck
idrummerboy13 is offline