Cain :
I switched the pistons disks from #1 to 2 in the front, and from 2 to 3 in the back (associated b3) . Then I ran gold rear springs on the rear shocks and rear green springs in the front with NO shock clips. Those short springs just arent cutting it-I see those ran here with 3 or more shock clips-so I figured just try the 60 mm springs in the front. The bottoming out issue will be reduced. BTW I use shock limiters... The discussion about the chassis trimming is interesting...before I do that to the kit chassis I'll make another one out of carbon fiber and I'll experiment with that one.