Originally Posted by
rcgod
I found that my diffs were leaking around the steel insert that presses into the diff case. I glued them in and haven't had a drop leak out since.
Originally Posted by
Feint Motion
^^This- Do this and your leaking diff problems will go away. No need for oversized O-rings, etc..
Also sand your diff cases.
Good call guys. Thanks. Now that you say that Im sure thats my problem. Was thinking about getting some new dif cases anyway to try to fix this issue. Its to late tonight to pull them all break them down, clean them and glue them then put it all back together. Gotta be up to head to the track in 6 hours, so I'll order a set of cases and do this on the new parts.
Thanks again. Saved me the trouble shooting time.