Originally Posted by
JohnJoe
Anyone have any trouble with the turnbuckle eyelet on the front camber link rubbing on rim if using more than 1mm shim with long ballstud? Noticed on some setup they run 2mm with long ballstud on the caster block but i tried it and the rim hits the eyelet when turned. Is there a way to fix this?
I'm running 2mm on outer ball and have not noticed eyelet rubbing on the wheel. I will double check to see if i'm using a long ballstud when I get home. Though, I do believe it is really close. Maybe your ballstud pulled out a little. I know I did have to get the 10mm thread length ballstud because when I initially used 2mm washer I had the stock ballstud pull out of the caster block.