Originally Posted by
AM03GT
Bumpsteer is the amount your wheels "turn" when the suspension compresses and extends. Take your car at rest with the wheels lined up and slowly push down on the front end. As the suspension compresses observe your wheels and watch them angle in/out while compressing. This is bumpsteer.
black+0 on a setup sheet means the driver is using an associated black ballstud with no washer/spacers beneath it on the steering knuckle.
Usually you want to adjust the height of your steering link to have zero bumpsteer.
so on the steering knuckle where the two holes are a & b hole underneath there is a ballstud is where u do or dont put a washer.
what do u mean adjust the height on the steering link to have zero bumpsteer thanks mate for helping me