Originally Posted by
puiwc
i am using hobbywing motor 10.5t
Try this
FDR 7.30/7.50
DRRS 9
Boost 44
Turbo ramp 12/0.1s
turbo timing 20
start rpm 9000 rpm
turbo delay 0.2s/0.3s
timing acc 400/500rpm
try the lower setup then change one at a time depending on the heat produce by motor, check the temp every 1.5/2mn and stop if the motor is getting too hot in any case but this should be a good start. You could use a fan on motor too (recommended)