R/C Tech Forums - View Single Post - Disc spring as Centax clutch spring ?
Thread: Disc spring as Centax clutch spring ?
View Single Post
Old 09-11-2011 | 04:28 AM
  #48  
TomB
Tech Champion
iTrader: (10)
 
Joined: Mar 2006
Posts: 5,120
From: www.moorebankraceway.com
Default
Originally Posted by Roelof
And another brand with these spings.

http://www.teamxray.com/teamxray/new...05&catName=RX8 Conical Clutch Washer Spring Set Instruction Manual

The funny thing is that all do come with a combination of 0.4 and 0.6mm while I did find out the 0.5 is working very well. Maybe playing with one more or less or more of the one than the other you can play more with the strength than with only a set of 0.5mm springs.

On the other hand, when you have found the right spring like the Shephers or the Orion square you do not change it.
this is interesting, i clicked one of the links above and it seems someone sells these high temp steel conical springs but it is $15 euro!

http://www.piranirc.com/prodotto-143...-PiraniRC.aspx

Roelof, do you have a link to a seller who ships worldwide who sells these springs at a cheaper rate?
TomB is offline  
Reply