Got my new slipper pads (as well as shock pistons) in today from Mantis...

I haven't had a chance to really test out the Mantis slipper pads at the track to see how they perform, I will hopefully get to tomorrow or no later then Sunday at the track. I will try to put at least 5+ packs into it in one day and see how they hold up then. The clutch basket works great and is far better then just using the stock setup, but I want to see how these new pads hold up and I will post my review after some good test runs around the track etc.........

My motor/esc setup is:

Tekin RX8 with Tekin Pro4 4000kv motor, and gearing at 14/62 (may try 15/62 or 16/60 etc)