R/C Tech Forums - View Single Post - The Speed Passion Thread
View Single Post
Old 09-06-2011 | 05:18 AM
  #7845  
Pattojnr's Avatar
Pattojnr
Tech Elite
iTrader: (19)
 
Joined: Apr 2006
Posts: 4,594
From: Perth Australia
Default

17.5 1 cell , and MMM motors with stock 323 software.
having some real issues getting pace wiht Tekin/LRP combos.

have a base setup that doesnt get hot, and top speed is only just down . however, it lacks punch out of corners, and takes a while to wind up.
im putting in settings that are pretty much defaults, but have gone down a little for temps on turbo timing ramp, i thikn 24 is default, i have it on 18.
the one setting i find still makes or breaks it, is the ACC timing. default is 350.
i set one up at 250, and temped, sat on 68- 73 for 3 or 4 mins, then 4 laps later it smoked a brand new MMM 17.5. so last weekend, we ran a 1 cell 17.5 and it seemed quicker wiht the base settings. but still lacked. so ramped up boost, and went to default of 24 for turbo ramp. temped fine. changed the ACC timing, from 350, to 300 this time. and it looked fast, like the MMM did before it smoked. same deal, 3 or 4 mins, never got over 74C, then a few laps later, it smoked a new 1 cell. but the speed and punch is what we are after. dont understand how a few laps more after temping at under 75C that they just smoke. its quite a large straight, and fast flowing track. any help would be great, cant keep smoking these things.
Pattojnr is offline