Originally Posted by
arn671
Hey guys, with the carpet season coming up, some set ups are going upwards of 5-6mm of spacers on the rear hub. My question is: with the kit captured balls I can get up to 4mm before the screw head rubs the inside of the rim; I switched to the X-ray ball studs/cups but noticed they are 1.5mm taller that the stock ball/cup combo-do you all factor that into the measurement? For example: if the set up calls for 5mm of spacers do you put 3.5mm of spacers because of the difference? Thanks for the info
Hi Alvin
I take the measurement from the center of the ball cup..The Xray ball studs is taller by .1mm
So if you wanted to maintain the same box stock 4mm shims set up ,just subtract .4mm shim with ball studs..