R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 08-28-2011 | 06:26 PM
  #5502  
kurtblastoff's Avatar
kurtblastoff
Tech Master
iTrader: (87)
 
Joined: May 2007
Posts: 1,191
Default
Diff is fine that's the first thing I checked. Instructions tighten then back off 1/8 turn. I always back off 1/6 turn.
kurtblastoff is offline  
Reply