Originally Posted by
bmsgangster
b4.1 is pushing, I have tried everything, orange kyosho springs front, black kyosho rear, short front link no spacers, rear link 1 spacer, 1deg camber front, .5 back, 3 deg toe in center w/.5 hubs, 2deg anti squat, 32.5 w/#2pistions front, 30w #2p rear. upper shocks all the way to inside, lower front outside, rear inside. 3 internal shock limiters front , 2 rear, m4 scrubs aka foams(red) front JC rips 1/4 oz in front, 17G FT lipo block with 3/4 oz across the backside of the battery 1/4 oz on the rear triangles
track is indoor, wet clay/ dust, smooth/bumpy med traction
WHY IS MY CAR PUSHING, it will push high speed entering corners slow speed tight corners...
thanks!
Two things I'd try. First, switch to a 2.5 toe block with your .5 hubs. When I ran indoor last year for the first time my B4 plowed through the turns. I was running 3.5 toe. Switched to the 2.5 and was a differ car. If you still need more steering go to the inside bottom hole on the front shocks.