R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 08-28-2011 | 08:22 AM
  #5486  
bmsgangster
Tech Adept
iTrader: (1)
 
Joined: Oct 2009
Posts: 118
Default

b4.1 is pushing, I have tried everything, orange kyosho springs front, black kyosho rear, short front link no spacers, rear link 1 spacer, 1deg camber front, .5 back, 3 deg toe in center w/.5 hubs, 2deg anti squat, 32.5 w/#2pistions front, 30w #2p rear. upper shocks all the way to inside, lower front outside, rear inside. 3 internal shock limiters front , 2 rear, m4 scrubs aka foams(red) front JC rips 1/4 oz in front, 17G FT lipo block with 3/4 oz across the backside of the battery 1/4 oz on the rear triangles

track is indoor, wet clay/ dust, smooth/bumpy med traction

WHY IS MY CAR PUSHING, it will push high speed entering corners slow speed tight corners...

thanks!
bmsgangster is offline