R/C Tech Forums - View Single Post - Team Associated TC6 Thread
View Single Post
Old 08-26-2011, 12:51 PM
  #3603  
roger999
Tech Fanatic
iTrader: (13)
 
roger999's Avatar
 
Join Date: Aug 2010
Posts: 844
Trader Rating: 13 (100%+)
Default

Originally Posted by bvoltz
Yes, I currently have the Associated Spur 69T (48P) in the car and I can put a 37T (48P) on. My problem is do not have anything larger to try. You will have to use the bottom motor mount hole not the back one, you will not be able to get the 2mm wrench in or the screw in the back hole. Also you will need to put the pinion on like you did with the TC5, because it will not fit though the opening between the motor mount and top deck.... You should be able to fit the following range of pinions on a 72T (48P), 30T to 43T giving a range of FDR from 4.8 to 3.35.
Didn't have a tc5 so not sure how to put the pinion...? so mayby go with 64P, spurs and pinions should be smaller...? 48x96?
roger999 is offline