R/C Tech Forums - View Single Post - 1/12 forum
Thread: 1/12 forum
View Single Post
Old 08-24-2011 | 09:56 PM
  #36195  
jdeadman
Tech Master
iTrader: (41)
 
Joined: Oct 2008
Posts: 1,325
From: Grand Portage, MN
Default
Originally Posted by hardmankam
Sorry if his question has been asked before...

I run my 1/12 on asphalt and my front tire cones quite a bit on uneven tire wear. Currently, the outside tire wears more than the inside tire. This only happens on the left tire, the right side is quite even. Could this be because of the track layout and there are more high speed right turns than left turns?

Also, should I add more negative camber OR more positive camber to front tire? This confuses me a little. Currently, I have set both L & R to be -1 degree.

Thanks for any help.
Generally a little more coning on the left is normal on an abrasive surface but sounds like you have too much camber on that tire.
jdeadman is offline  
Reply