Originally Posted by
Antimaster
I've build the last week my new tc6. I've had some problems and now i want to know if it's normal:
1. The ballstud form the rear hub touch the rear shock tower if the shock is complete inside. I've build the standard-setup inside with 3°. If i want to build 1° or 2° inside then it touch the tower complete.
2. If i build the steering crank to position B i don't have enough steering because the turnbuckle touch the upperdeck. so i changed to position A. Before there was only 15° steering.
3. The shock isn't long enough because if i change the back shocks to the inner hole i can minimum build a droop of 6.5 but i want to have 4 for lower traction tracks.
So i hope you can understand what i mean and maybe can help me?
Hi Antimaster
Well i am trying to understand, but it does not make much sense, as none of your mentionned problems seems possible if you built your car properly.
Can I suggest that you take your manual again and go over all your problems one at a time, the shocks are definitely long enough, maybe you are putting the steering post in the wrong hole on bellcrank post insert and your droop will depend on which arm mounts and position you are using.
hope this helps