Originally Posted by
SlaminRC17
Anyone know the program number for the "blinky" program. And where to get it... I think I've got it, but I cant see it blink...
Thanx in advance, Kevin
Originally Posted by
SlaminRC17
So no info on the No timing/ "blinky" profile? Ok
Hows about how to run my GT2.0 on 1s, and run a 2s lipo receiver pack? Pull red wire out of connector on my ESC receiver wire?
Kevin
Originally Posted by
skypilot
what was the question about blinky mode, I miss it, as far as 1s it can be done but I don't remember exactly what I did to do it, and don't want to pass on bad info,
PM Mr Crum he knows, he told me. he has posts on this thread, maybe do a search for him or just type that in in the pm address it should come up
never mind, found the question.
its in the 323 software package on the sp site, if have it, and loaded the 508 no timing profile it won't blink until you rebind the esc to the radio. at least that what I had to do on several peoples esc to get it to blink, another question does your esc have a clear or smoked color bottom case, with the black case you won't be able to see it. I know one that just made a hole to see the light and then put scotch tape over the hole.