Originally Posted by
jag88
2-mid for the front shock locaton ... would that be 2 on the tower and a drilled hole between 1 and 2 hole on the arm ?
Thanks.
Jag88,
You are correct! I filled the existing holes with a 2 part epoxy and once that cured, I made a hole between them.
If you don't want to deal with that, a silver spring in the outside hole in the arm with 2.5-5 wt lighter oil in the shock should be pretty close.
Incidentally, I noticed that I made a slight typo on the setup sheet...but I think most people will be able to figure it out:
On front camber I intended -1.5 ... not - 0.15! Sorry!