Originally Posted by
tellan
I run 2 wgts the new LE and the old version with the Mckune conversion. set up on the mckune is long chassis wide front end and top brace. Im using the short arm and 10 degree caster blocks ,2 washers to rear and 1 in front .Camber is 0.5 mm.
The car goes good and is a very safe drive but just lacks that extra 5% to make it very competitve.
I go in to corners aggressive and tight but coming out car tends to push and understeer.
Looking for a solution, will long arm cure this or should i be looking some where else.
Also running in line axle blocks.
Running the 10º castor blocks will give you more power on understeer.
Try running with the 5º blocks. Bit less turn in but more coming out.
Also try some toe out on the front to get some steering back.