R/C Tech Forums - View Single Post - 3pks servo activity
View Single Post
Old 08-07-2011 | 11:14 AM
  #4  
J.Whiting's Avatar
J.Whiting
Super Moderator
iTrader: (64)
 
Joined: May 2005
Posts: 5,174
From: a very small town in wisconsin that is in the middle of absolutely no where
Default

Originally Posted by valk
its possible the pot is bad i suppose though my tc5 drives just fine with the radio. excellent throttle response. i imagine the servos in this car are pretty low end. though it seems to have enough balls to lock the brakes pretty good. ill have to muck around with the travel. have my throttle epa set to like 25 and 90 for the brake, maybe thats not enough travel for the throttle even though the car is full open.
those are about the same setting i had on my throttle settings when the throttle trigger was bad... they should be closer together.. like 50ish on throttle and 60ish on brakes.. just an example... try this... leave throttle alone but use the buttons to move the breaks or throttle epa up and down... by 40-80%.. does the servo horn move when you do this?? if it does you have a bad throttle trigger.. that is what mine did.. i was adding more brakes and i noticed the servo was moving with epa settings.. this should not happen at all... jeremy
J.Whiting is offline