R/C Tech Forums - View Single Post - Help with a lipo
Thread: Help with a lipo
View Single Post
Old 08-04-2011 | 08:02 PM
  #2  
crusey_aus
Tech Master
iTrader: (3)
 
Joined: Jul 2008
Posts: 1,465
From: Melbourne, Australia
Default
Charger should tell you the overall pack voltage on the screen, it should be 8.4v fully charged

No harm in discharging a little and trying again, screen will tell you the voltage when discharging

If the pack is below 6v the charger will not start the charge process

Could be just a faulty screen display or user error


Cheers
crusey_aus is offline  
Reply