Originally Posted by
goin2drt
Thanks for the advice. Two outside LEDs on both sides flashing. Yes I have tried reinstalling.
Usually if the 1,2 & 6,7 leds flash it indicates that the ESC is sensing the wrong motor. Check to see if the Motor Type is set correctly. It is possible that this setting was changed in error.
1. Brushless, fwd/brake
2. Brushless, fwd/rev
3. Brushless, fwd/rev delay
4. Brushed, fwd/brk
5. Brushed, fwd/rev
6. Brushed, fwd/rev delay