R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 07-25-2011 | 10:29 AM
  #4285  
Asharus's Avatar
Asharus
Tech Elite
iTrader: (42)
 
Joined: Apr 2011
Posts: 3,123
From: Long Island, NY
Default

Originally Posted by Laloosh
Hey guys I have a quick question. My b4 tends to plow on low to medium speed corners when on the power. I run on a high bite clay track where rear traction isn't an issue. What can I do to make the car rotate, turn better on power? This has been driving me nuts for a couple weeks now and has got to the point where I have to nail the brakes to lock up the rear and whip the back end around and hopefully come out facing the exit as straight as possible. It simply will not turn. On high speed turns, it dialed though.

Shocks are layed down front and rear. 27 1/2 weight oil all around, 25mm ride heigh all around. Short camber links in the front, middle in the rear. I run soft aka rebars on all fours.
My B4.1 felt pretty good at that track on Saturday. I was running Pink Tapers and BK Bars though, which are pretty much ghosted/slicks now. I'm using this setup to the T, with 1 degree of front toe out:

http://www.petitrc.com/setup/associa..._LIR201009.pdf
Asharus is offline