Just build the kit per the instructions, make sure you have all the tools necessary. You'll need a digital caliper for measurments and/or gap feeler gage (spark plug gap feeler gage) to the centax endplay. If you don't already have a good caliper, its highly recommended to get a Mitutoyo. I bought a cheap one a while ago and it wasn't very repeatable.
The kit doesn't come with black grease, or threadlock, so go get some mugen super grease, or some kind of black grease from your hobbyshop. You'll definetly need those. The instructions tell you where to apply the goo.
Good luck building your kit, ask specific questions in the 710 thread if you have problems building it.