R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 07-20-2011 | 06:46 PM
  #4154  
Asharus's Avatar
Asharus
Tech Elite
iTrader: (42)
 
Joined: Apr 2011
Posts: 3,123
From: Long Island, NY
Default
Originally Posted by kman16jr
Hey i have the factory team b4.1 and it is already built but just picked up a lrp x12 13.5,align ds 620 servo,gens ace 40c hardcase,and will most likely pick up another rs speedo but really want to know what type of gearing i should run. I have alot of different pinions and a few spurs but want it to be as cool as possible but want it to be the most efficient i could get it.I also want to know if you guys are using weights,if so where.any info would be nice.this is the track ill be running on.
I have no experience with carpet tracks but I run 75/30 w/ a 13.5 motor, no timing/boost. I run the Lipo Ballast weight, 1/4 oz in each rear side pod, 1/2 oz next to receiver, and 1/4 oz on each side of the servo compartment (mounted sideways on the outside lip of the chassis next to the servo).
Asharus is offline  
Reply