Besides the stuff AE tells you that you need, get:

HT slipper pads
Some people say Sways are necessary....some tracks they might be, but not all...
Several different weights of shock oil and diff oil
Better tires

Oh, and a 1/4 inch washer to stick between the slipper spring and outer slipper plate so that you can fully compress the spring.

Also, get a hand-held powered screwdriver with the proper metric hex heads (don't use a 5/64" in place of a 2mm driver....it's really close, but not quite the same thing) the power screwdriver will save your wrist from repetitive stress...the truck is a bit stiff to get the screws into the plastic when it is new....


That's all I've needed...