RC10.com

Click on cars and trucks
click on SC104x4
click on set ups
Choose one.

You're asking all the right questions, but you can answer them yourself with just a little effort!

Hint: the newer the set up (as long as the track surface is in your ballpark), the more likely it still MAY or MAY NOT work for you.

For instance, Sunday at my local track, we had four SC4xs, all setup very differently. EAch truck worked (more or less) for their drivers, But felt very different to each other when compared to what we were each driving.

I'm not trying to pick on you at all. But the best advice I can give you, is to build it, do a setup on it (start with the one in the back of your manual), then go drive a bunch of laps on it. If it misbehaves and you can't figure it out, post up here a description of how it FEELS to you. Then as a group of peers, lots of guys here can help you figure it out.

But you gotta build it and drive it first.

P.S. I recommend 3mm of rebound...settled on that from a setup sheet on rc10.com. it worked, I used it.