USGT rules...considering spec to Xpatterns

USGT Class Rules and Specifications


Chassis Specification:
Any 1/10 4wd or Fwd sedan with 4 wheel independent suspension.

Weight Specification:
4wd 1450g weight Fwd 1400g weight

Body Specifications:
Any 190mm or 200mm body. Body can be any body that is NOT on the ROAR T2 body list. NO Trucks
Any "SCALE" molded wings can be used. Lexan wings 10mm maximum height / side dam height
Scale type race liveries encouraged

Tire & Wheel Specifications:
Tires-Any treaded (non slick) non belted rubber tire available 24 or 26mm. Removing belts from belted tires is not allowed. Must used a non-molded (ex. open cell foam) insert or no insert. Grinding of tire tread is NOT permitted. Sanding of mold seam to remove seam is allowed.
Wheels- Any 24 or 26mm spoke (non-dish) type wheel

Ride Height Specification:
Minimum ride height is 5mm.



Motor Specifications:
21.5 + 2s lipo batteries No tuning rotors, must use OEM rotor 12.3-12.5mm

Approved ESCs:
ESC ROAR approved spec software or USVTA list

Race Specification:
6 minute qualifiers
8 minute mains

Battery Specifications:
ROAR approved hard case batteries