Originally Posted by
Buzz3
I added the 14mm rotor and can go ten minutes on a 6000 mah for whatever that's worth. I also see heat (175-185) but never thermal.
Clean all the drivetrain bearings and use some good bearing lube.....makes it much more free. Also use Mobile 1 synthetic grease on the ring and pinion vs. the stock stuff. Make sure you're not running drag brake. Last week the outdoor conditions were 90-95 degrees I'm running the Rx8 and tekin 4.5 motor...ESC temp 115 and motor 144-156...large loose track, 15 pinion.