R/C Tech Forums - View Single Post - Speed Passion Thread
Thread: Speed Passion Thread
View Single Post
Old 07-11-2011 | 08:44 AM
  #426  
Solara
Tech Champion
iTrader: (17)
 
Joined: Sep 2002
Posts: 9,295
From: Chicago Illinois USA
Default
Originally Posted by mark in wi
I'm starting to play with ALL the adjustmentsof my ESC (2.1 prostock) and WOW! I have the 323 stock update and I'm wondering what/how do I need to do to get blinky (no timming/boost) for raceing at the local club? Also from what I have figured out I can set up 3 profiles and switch between them. To switch do I have to change it with the pc or can I do it with the LCD box?

This brushless stuff is fun but I haven't had to think this much in a while!

Thanks for the help,
Mark
Mark...the 3 profile can only be saved within the same software...ie, if running 323stock, you can save 3 settings for like 13.5 stock on road, 17.5 stock SCT or 17.5 off road buggy........all within the same software only.

But once you are going to different software, like 205, those profile will not be transfer or carrry over...but you can create the same 3 profile for 205....

Yes, you will need the LCD programmer box is upload the 508_no_timing software to your GT2 ESC in order to run the blinky mode.
Solara is offline  
Reply