R/C Tech Forums - View Single Post - Go Engine USA 2011 Thread
Thread: Go Engine USA 2011 Thread
View Single Post
Old 07-10-2011 | 01:02 PM
  #1778  
lochness42's Avatar
lochness42
Tech Fanatic
iTrader: (1)
 
Joined: Feb 2008
Posts: 824
From: London, UK
Default
Originally Posted by inferno13
if your plug is coming loose i would also check the cooling head bolts to make sure they are tight, settings on mine are ...
LSN......3/4 TURN IN FROM FLUSH
HSN......1/2 TURN IN FROM FLUSH
IDLE GAP.... .07 GAP (EYE BALL MEASUREMENT)
It came loose due to my mistake - I apparently didn't tighten it enough (have checked plug before semi). In final it held just fine for full 30 minutes without coming loose.

To engine settings - is it with 7.0 venturi?
lochness42 is offline  
Reply