R/C Tech Forums - View Single Post - 1/10 R/C F1's...Pics, Discussions, Whatever...
Old 07-10-2011, 12:33 PM
  #2738  
F N CUDA
Tech Champion
iTrader: (34)
 
F N CUDA's Avatar
 
Join Date: May 2007
Location: Mission Viejo, So Cal
Posts: 5,908
Trader Rating: 34 (100%+)
Default

Originally Posted by ptorlax18
just built my f104 and my lipo battery wont fit between the pivoting electronic trays. The battery fits with no electronic trays and just the posts, but wear do i mount the esc and receiver then. ALso i need a battery that has the wires coming the opposite upper corners, mine the both come from the same spot so i cant get it under the upper chassis. Any remedies or examples of what you guys use or how you have arrange your electronics

thanks a bunch
Need to shave down the inside of the trays loops on the inside, right up against the posts almost like a C and you can also loosen all of the upper deck screws to allow extra play to wiggle the battery into it's spot.
Should be able to easily figure the best spot for the wires to hang out, loosening the screws helps a lot.
Hold the chassis flat on the table when tightening the screws back up to keep the car squared up and not tweeked.
F N CUDA is offline