Have you tried a matched (frequency) set of stiffer springs all the way around? I suppose you could try dropping the oil weight a touch. There's a tough step up after a hair pin that I always struggled with. Watching most of the local fast drivers, they were all sliding wide in the hair pin to run up a bit more speed.
Originally Posted by
gguertin145
I need a little setup help. I have been struggling with clearing a jump section at our track and I am not sure what to do... I need more distance by a foot or two... This is just our club track so not a ton of people to reference at the track and the ones that are clearing it are using a 22.
I have 25mm ride height all around and a 6" wing with 5mm lip
brown springs front #1 piston 30 weight oil with 3 limiters
Kyosho dark yellow rear #2 piston 27.5 weight with 2 limiters