R/C Tech Forums - View Single Post - Tune With Camber Links
View Single Post
Old 07-07-2011 | 09:14 AM
  #225  
MantisWorx's Avatar
MantisWorx
Tech Champion
iTrader: (28)
 
Joined: Jun 2010
Posts: 5,955
Default

Originally Posted by carcrazy699
So I have been reading this thread and have tryed what you have mentioned so far. So right now my 4wd buggy is setup with stock springs f/r and 30wt oil front and 25wt rear along with stock pistons. The problem im having is the rear still feels stiff compaired to the front. the front rebounds faster when dropped than the rear.

So far what I am thinking is that I need to go down to 20wt in the rear but not sure. I am also thinking that it could be my sway bar making the rear stiffer but its setup how the manual says with the bars.

increase the hole size in the rear pistons as well as go to more holes, shouldnt have to go lower than 25wt and get it to act right.
MantisWorx is offline