R/C Tech Forums - View Single Post - Tune With Camber Links
View Single Post
Old 07-06-2011 | 07:17 PM
  #216  
nytryder
Tech Regular
iTrader: (7)
 
Joined: Feb 2011
Posts: 313
Default

Yes, with the d8's. I am using the stiff orange vorza springs up front and had the grays out back and it worked pretty dang good before.

I went to blues in back now which are one rate softer than orange, but much firmer than the grays were to get even frequency as well as moving shock positions a little. I had to move the upper front mounts in one hole and the rear lowers out one hole.

Before,when I ran firmer springs in back, it would kick and also nose down off jumps. hopefully now that I have the same pistons front and rear, the stiffer springs will work good this time....we'll see.
nytryder is offline