Originally Posted by
jason55
Hey guys I love this forum it's helped me so much in my sc10 4wd kit build can't thank all the people that post enough for their help. So my questions are I'm getting into racing where should the slipper clutch screw be How tight for a very loose slippery track ... 2nd as far as the shocks that come with the kit what weight oil should use rite now I have 30wt rear and 35 wt in front ,as far as upgrading the bearings in the truck do you think this is worth it or are the bearings that come with the kit good enough. Thanks for all your Guys help. Any help with this would be appreciated thanks jay
I have mine pretty tight but I run on a hard packed clay track, so not sure about how you should run yours since I've never ran on that type of track........ For the shock oil I would stay with what you have in the front and drop the rear to 25w...... I've had no issues with the bearings but if there are better ones out there I don't see how it could hurt anything, but not sure if it'll improve anything.......... I'll leave that answer up to the experts ;-)