Originally Posted by
BmainStar
It works fine on the chassis , just use some extra layers of servo tape for cushion.
Originally Posted by
BC slasher
i just picked up my new scte ,and the first thing i looked at was the battery tray and thought ill cut the esc tray off first and go from there.i cut the esc tray off my buggy and used 3 or 4 layers of servo tape and my rx8 has been fine.
Keep in mind if you trim it and put some holes in it you can still use it.. when you take the esc off the tray you also make it much harder to clean. I run my lipo's vertical and with a very cut up tray, even lowered, but I left the esc portion; at least enough material to mount the mmp.
