View Single Post
Old 07-01-2011, 02:56 PM   #7
houston
Tech Prophet
 
houston's Avatar
R/C Tech Elite Subscriber
 
Join Date: Sep 2004
Location: portland OR
Posts: 15,206
Trader Rating: 94 (100%+)
Default

the losi should come with a shaft extender in the kit which is what you need to use if the bearing sticks out past the crank the nova engines have a stepped out inner race on the front bearing as to aleviate the need for shims behind the collet on certain manufacturers clutch systems , not needed on the losi but that is what it is and one other thing to be very sure of is to make sure the crank is pulld all the way out and the collet is slid all the way on


hope this helps ,
Monty
__________________
TEAM FUSION X ENGINES /RC-OMG USA/ TEAM BYRON ORIGINALS / TEAM PROLINE RACING TIRES / TEAM SICK GRAPHICS /TEAM KYOSHO / things I support: COMP HEAT DEALER /TEAM LUNSFORD/ FUSIONX™ USA / TEAM KYOSHO / "H.E.S."™ / BYRON FUELS / RC-OMGUSA/KICWEBDESIGNZ/AKA TIRES/PROLINE RACING TIRES /RAYA RACING/BUKU POWER CLUTCH/M2CRACING/special thanks to STAV and JIM HOTTIGREENMOUNTAINGRILLS.COM
houston is offline   Reply With Quote