R/C Tech Forums - View Single Post - The Speed Passion Thread
View Single Post
Old 07-01-2011 | 01:48 PM
  #7400  
Rod M's Avatar
Rod M
Tech Master
iTrader: (4)
 
Joined: May 2003
Posts: 1,545
From: Sydney, Australia
Default

Originally Posted by g12314
Is this the track?: http://www.moorebankraceway.com/
If so, how long is the straight?

The D3 setup on the SP site is developed for a much smaller (120ft straight), very tight track style. I dont see those setting working well on a bigger flowing track.

I am hoping to get to our local big track (225+ft straight) soon to develop ESC / Motor setups. As a guess, here would be my big track starting point based on the 528 SW setup I ran last year:

Motor Timing: D3, 1 tick advance
FDR: 5.5 to 6.0 (again BIG track)
DDRS: Level 8
Boost timing: 36
Turbo Slope Rate: 6
Turbo Timing: 18
Boost Start RPM: 5000
Turbo Delay: 0.3s
Boost Timing Acceleration: 500

NOTE: I have not tried the above, so PLEASE check motor temps every few laps to ensure the settings are not way off.

Jimmy
yes that is the track, not sure the exact length of the track,

I will give it a go and see what happens,
Rod M is offline