Originally Posted by
inpuressa
For the front pulley holder, I used different methods for the two screws to hold that piece down. For the front side, I used a little longer screw and put a lock nut from underneath and for the rear side, I used a fairly long screw (20mm). This allowed me to torque the screws really tight to prevent the pulley holder from moving. This should do until someone makes an aluminum version.
From the looks of the picture that is the pulley tensioner, not the front puley holder. Please let me know if we are talking about the same part please.
check part #3454516
Tamiya TRF416 belt stabalizer mount. Aluminum...
Im checking to see if its cross-compatible.