Originally Posted by
speedracer1bp
The 26t goes on the jackshaft. A 27t goes on the one way. Hope this helps.
by 'front' pulley it is unclear if you mean the front pulley for the front belt or middle belt.
the front belt drives the oneway with 27 teeth and a hex drive (pre '09 was 24 )
the middle belt drives a 25 or 26, with a 4sided adapter. the 26 is the default.
so the 4 vs 6 sided hole should clearly indicate where the part is used.
Thanks, I misread the manual, i was looking at the middle belt pulley instead of the one way. After the crash i did a complete rebuild. Also made a
build report of the eleven car.