R/C Tech Forums - View Single Post - SC10 4x4 Thread
Thread: SC10 4x4 Thread
View Single Post
Old 06-26-2011 | 02:34 PM
  #3736  
FrancoisTX's Avatar
FrancoisTX
Tech Adept
iTrader: (7)
 
Joined: May 2011
Posts: 153
From: Houston, Texas
Default

Run 6 packs today and my setup are still not perfect,
Front
50wt
Sway bar 2.5 mm
3 turns on my suspension
5 mm on the outer ball
-1 on camber
Diff 30000

Rear
40wt
Sway bar 2 mm
3 turns on suspension
4 mm on outer ball
-3 on camber
Diff 5000

Tires subculture super soft
Castle creation combo 3800 kv
Gearing 16/62
TrCkstar o ring on suspensions

Track clay dusty very long, outside

No problem of over heat, flying wheel, acceleration amazing, top speed perfect.

The problem is my rear is not stable at all, my T4 is better!

I didn t think about slipper because 4x4 but maybe this is the solution...
I have outer pad HD and 3.5 mm like say the manual. Maybe my slipper is too tight....

Help me guys because I have no more idea
FrancoisTX is offline