anyone had a problem with the belt coming off the front pulley under a short drive, With some hard breaking and turning.

once i set my tensioners (front and rear) to max tension, it seems to have stopped the problem. Although im unsure if it is too tight.

if i take the motor off the pinion, it rolls nice and smooth for a few feet after a short push.

the truck runs nice now, although it doesn't seem too tight, i just think that with the tensioners set to full tension, it seems wrong to have this.

also i run a tenshock 5200kv 4 pole motor with a sc8 speedy from hobbywing.

thanks guys.